Quidnon

“A houseboat that sails”

▼
Tuesday, September 8, 2020

End of Project

›
This project was intended as a lifehack for getting around outrageously high real estate prices and rents in the few remaining desirable pla...
8 comments:
Saturday, February 29, 2020

Custom Hardware

›
Three years ago I bravely published a post titled “ The Final Sheeting Arrangement .” I was filled with optimism at the time. After much exp...
9 comments:
Saturday, October 19, 2019

Engine Mount Design

›
Deployed — Stowed — Raised for maintenance Quidnon is rather indifferent to choice of engine: just about any outboard over 25hp will do....
19 comments:
Tuesday, August 13, 2019

Hull Assembly Made Easy

›
This project is now in its fifth year and, dare I say, running smoothly. It started out as a pile of good ideas that came out of the experie...
7 comments:
Sunday, June 16, 2019

Dismasting Made Easy

›
You are sailing along on a passage, on autopilot, the radar set up to wake up and do a sweep every 10 minutes or so and sound an alarm if ...
14 comments:
Wednesday, May 22, 2019

The Rudder

›
Rudder assembly Quidnon’s steering has evolved quite a lot since the original concept. Now all that’s left of the original concept is the...
7 comments:
Monday, May 13, 2019

The Centerboard

›
Although the Quidnon blog has been quiescent for the past three months, there has been some good progress on completing the design, and I c...
18 comments:
›
Home
View web version
Powered by Blogger.